Managing the Impacts of Storm Surges on Victoria Island, Lagos, Nigeria
Victoria Island is one of the barrier islands along the Nigerian Coast. The others are Lagos, Lekki, Ikovi, and Badagry. A general characteristic of these barrier islands in Nigeria is...
Increasing Computational Accuracy of Radial Gate Flows
Radial (Tainter) gates are the most widely used flow control structure on large, open channel conveyance systems. In contrast, the hydraulic forces are complicated and this type of gate...
Developing a Rating Table for the Central Diversion Dam Radial Gates
The Central Nebraska Public Power and Irrigation District uses radial gates for flow control throughout its system. The rating tables for five radial gates on a diversion dam are in error,...
Discharge Characteristics of Overshot Gates
Overshot gates are becoming increasingly popular for controlling water levels in open channels because of the ability of the gates to handle flow surges with limited depth changes. While...
The Effects of Water Surface Profiles on Manning's Roughness Coefficient
The Manning Equation has wide application in engineering practice. Nonetheless, certain aspects of it are still not widely understood. Often, engineers deduce the value of Manning's...
Evaluating Hydraulic Roughness in Tunnels
Much of the data presented in the literature on measured friction losses in tunnels are given in terms of the Darcy-Weisbach
Two Dimensional Modeling of the Mobile River Delta and the Mobile Bay System
Two dimensional hydraulic modeling of Mobile Bay and the Mobile River Delta was conducted to determine critical hydraulic conditions for scour evaluations at bridges in the Mobile Bay...
Contraction Scour at Bridges: Analytic Model for Coarse-Bed Channels
Contraction scour at bridges spanning coarse-bed channels is evaluated based on mass conservation of both water and transported sediment between a reference channel section near the crossing...
The HEC NexGen Software Development Project
The NexGen project is developing successor software packages to the existing family of HEC computer programs. Development is occurring via teams comprised of technical specialists, computer...
Hydrologic Modeling System
The Hydrologic Modeling System (HEC-HMS) is new-generation software for precipitation-runoff simulation that will supersede the Hydrologic Engineering Centefs HEC-l program. Technical...
HEC-RAS (River Analysis System)
HEC-RAS (River Analysis System) is an integrated system of software, designed for interactive use in a multi-tasking environment. The system is comprised of a graphical user interface...
Next Generation Flood Damage Analysis Program
The Hydrologic Engineering Center has developed a next generation Flood Damage Analysis computer program for formulating and evaluating flood damage reduction plans. The program design...
Hydraulic Model Study of the Prado Dam Spillway
The existing Prado Dam, located in the City of Corona, CA, is deficient in providing adequate flood protection to the Santa Ana River floodplain downstream of the dam. To provide adequate...
Fish Passage Pool Bedding Analysis
Anadromous fish passages, stream dynamics and the artifical channel segmented into a natural stream should fttnction seamlessly. This paper intends to develop reasonable procedures a designer...
On Silt Abrasion Erosion of Three Gorges Hydraulic Turbine in the Future
In this paper the basic parameters of Three Gorges hydraulic turbine have been reviewed and the operation characteristics of Three Gorges hydropower Station pointed out. Combined with...
Capillary Pressure-Saturation Relationships in Fracture
Understanding and quantifying unsaturated flow through fractures in rocky slope is important for design and construction of drainage system in large-scale hydraulic engineering. The data...
Irrigation of Grain Sorghum on the Delmarva Peninsula
Irrigated grain sorghum experiments were conducted for two years on a Norfolk sandy loam soil. Full irrigation was compared to partial irrigation and no irrigation in a randomized block...
Designing Concrete Culverts to Resist Scour Damage
Concrete culverts have been used for over 100 years. In this period, the main design concern centered on structural and hydraulic adequacy of the culvert. Scour is a relatively recent...
Numerical Simulation of Hydraulic Jump
Hydraulic jump is numerically simulated by solving the laterally-averaged governing equations. The governing equations are derived for two-dimensional flow by laterally averaging the time...
Study of Hydraulic Jump Lengths on Inclined Channel Beds
A hydraulic jump is generally used to dissipate kinetic energy of flow to protect man-made structures such as spillways, drop structures, and outlet works. It serves as a perfect location...
Return to search